Product Details:
Minimum Order Quantity | 1 Piece |
Model Number/Name | YD500RX1 |
Phase | Three Phase |
Brand | Panasonic |
Rated Input Current | 550 A |
Cooling Mode | Forced Air Cooling |
Voltage | 41.5 V |
Weight | 60 Kg |
Frequency | 60 Hz |
Input Supply Voltage | 415V, +10% |
Operating Temperature | 50 deg C |
Dimension | 545 x 380 x570 mm |
Cable Length | 1.8 m |
Wire Feed Speed | 20.1 Meter/ Minute |
Product Details:
Minimum Order Quantity | 1 Piece |
Phase | Single Phase |
Working Voltage | 240 V |
Insulation Class | A |
Cooling | Forced Air |
Compatible Rods | 8 mm |
Condition | Used |
Model | Used YC-400TX3 |
Brand | Panasonic |
Product Details:
Minimum Order Quantity | 1 Piece |
Phase | 3 Phase |
Welding Type | Tig Welding |
Brand | Panasonic |
Usage/Application | Aluminium |
Model Name/Number | YD-500RX1 |
Voltage | 10.2-22v Out put |
Weight | 74 kg |
Output Current Range | 400 Amps |
Automation Grade | Manual |
Product Details:
Minimum Order Quantity | 1 Piece |
Model | YD350GL5 |
Brand | Panasonic |
Power Consumption | 14.5 kVA |
Phase | 3 Phase |
Working Voltage | 400 V +/- 10% |
Protection Class | IP 21S |
Weight | 50 kg |
Dimension (L x B x H) | 380 x 550 x 645 mm |
Welding Current Range | 500A |
Duty Cycle | 60% |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding. The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds.
Product Details:
Minimum Order Quantity | 1 Piece |
Phase | Three Phase |
Current | 400 A |
Model Name/Number | YD400KR2 |
Brand | Panasonic |
Cooling Mode | Forced Air Cooling |
Automation Grade | Semi-Automatic |
Weight | 149 Kg |
Dimensions | 736 x 675 x762 mm |
Frequency | 60 Hz |
Technology | Rectifier Based |
Rated input voltage | 415V,+10% |
Rated Output Voltage | 39 V |
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Panasonic |
Model | YC350WX5 |
Weight | 74 kg |
Frequency | 50 Hz |
Rated Input Capacity | 16.6 kVA |
Rated Output No-load Vvoltage | DC 62 V |
Rated Duty Cycle | 35% |
Output Terminal | Fast Plug |
Enclosure Class | IP23S |
Dimensions | 560x380x730 mm |
Product Details:
Minimum Order Quantity | 1 Piece |
Phase | Three Phase |
Current | 250 A |
Brand | Panasonic |
Cooling Mode | Forced Air Cooling |
Weight | 10.5 Kg |
Dimensions | 376 x 675 x 747 mm |
Frequency | 50Hz |
Rated input voltage | 415 V,+10% |
Cooling Type | Forced Air Cooling |
Insulation | H (Class) |
Model | YD250KR2 |
Applicable Shielding Gas | CO2/CO2+Ar |
Cable Length | 3 m |