Product Details:
Brand | Panasonic |
Model | YD-350GZ4 |
Phase | 3-Phase |
Current | 350 A |
Voltage | 380-415 V |
Dimension (L x B x H) | 380x550x640 mm |
Duty Cycle | 60% |
Product Type | New |
Weight | 61 kg |
Rated Duty Cycle | 60% |
Frequency | 50-60 Hz |
Output Current | 350 A |
Rated Input | 17.7 kVA |
Dimension | 380 x 550 x 640 mm |
Rated Output Voltage | 36 V |
Power Control Method | IGBT Inverter |
Welding Processes | CO2 / MAG / MIG |
Max No Load Voltage | 78 VDC |
Product Details:
Brand | Panasonic |
Model | YD-250RX1 |
Welding Current Range | 50-250A |
Power Consumption | 7.7 kVA |
Phase | 3 Phase |
Working Voltage | 415 +- 15%V |
Welding Current at 100% Duty Cycle | 193A |
Insulation Class | H |
Cooling | Forced Air |
Power Factor | 0.90 |
Technology | IGBT |
Protection Class | IP21S |
Weight | 44 kg |
Dimension (L x B x H) | 54.5 x 38 x 57 cm |
Product Type | New |
Wire-Feeding Speed | 5-20.1 m/min |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Product Details:
Brand | Panasonic |
Model Number/Name | YD-500RX1 |
Phase | Three Phase |
Rated Input Current | 60-550 A |
Cooling Mode | Forced Air Cooling |
Voltage | 17-41.5 V (Output Voltage) |
Frequency | 50 - 60 Hz |
Weight | 60 Kg |
Input Supply Voltage | 415V, +10%, -20% |
Operating Temperature | -10 to 50 deg C |
Dimension | 545 x 380 x570 mm |
Cable Length | 1.8 m (gas hose 4.8 m) |
Wire Feed Speed | 5.3-20.1 Meter/ Minute |
Product Details:
Brand | Panasonic |
Current | 60-400 A |
Model Name/Number | YD-400KR2DJE |
Phase | Three Phase |
Automation Grade | Manual |
Cooling Mode | Forced Air Cooling |
Technology | Rectifier Based |
Frequency | 50-60 Hz |
Dimensions | 736 x 675 x762 mm |
Weight | 149 Kg |
Rated input voltage | 415V,+10% |
Rated Output Voltage | 16-39 V |
Model | YD-400KR2 |
Product Details:
Brand | Panasonic |
Model | YD-350GL3 |
Welding Current Range | 30-500A |
Power Consumption | 14.5 kVA |
Phase | 3 Phase |
Working Voltage | 400 V +/- 10% |
Protection Class | IP 21S |
Weight | 50 kg |
Dimension (L x B x H) | 380 x 550 x 645 mm |
Product Type | New |
Duty Cycle | 60% |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Product Details:
Brand | Panasonic |
Model | YD-400AT3DJR |
Welding Current Range | 20-410A |
Power Consumption | 17.6 kVA |
Phase | 3 Phase |
Working Voltage | 415 +- 20%V |
Welding Current at 100% Duty Cycle | 310A |
Insulation Class | H |
Cooling | Forced Air |
Power Factor | > 0.90 |
Technology | IGBT |
Protection Class | IP 23 |
Weight | 50 kg |
Dimension (L x B x H) | 55 x 33 x 60 cm |
Certifications | IEC 60974-1:2000/GB 15579.1:2004 |
Product Type | New |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Product Details:
Brand | Panasonic |
Model Name/Number | YC-400TX3 |
Output Current Range | 400 Amps |
Phase | 3 Phase |
Welding Type | Tig Welding. |
Usage/Application | MS, SS, Aluminum |
Voltage | 10.2-22v Out put |
Weight | 74 kg |
Automation Grade | Manual |
Product Details:
Model Number | 300 TSP |
Welding Type | TIG Welding |
Voltage | 415V, +10% (Input Voltage) |
Output Current Range | 5-300 A |
Brand | Panasonic |
Frequency | 50-60 Hz |
Weight | 136 Kg |
Duty Cycle | 60% |
Phase | 3 Phase |
Rated Voltage | 16-20 V |
Ingress Protection | IP21S Class |
Product Details:
Brand | Panasonic |
Current | 50-400 A |
Model Number/Name | YD-400RX1 |
Phase | Three Phase |
Cooling Mode | Forced Air Cooling |
Frequency | 50 - 60 Hz |
Weight | 52 Kg |
Input Supply Voltage | 415V, +15%, -20% |
Rated output range | 16.5-35.5 V |
Dimension | 545 x 380 x570 mm |
Operating Temperature | -10 to 50 deg C |
Product Details:
Brand | Panasonic |
Current | 50-250 A |
Phase | Three Phase |
Cooling Mode | Forced Air Cooling |
Frequency | 50-60Hz |
Dimensions | 376 x 675 x 747 mm |
Weight | 10.5 Kg |
Rated input voltage | 415V,+10%,10% |
Cooling Type | Forced Air Cooling |
Insulation | H (Class) |
Model | YD 250 KR2 |
Applicable Shielding Gas | CO2/CO2+Ar |
Cable Length | 3 m |
Product Details:
Current | 60-500 A |
Brand | Panasonic |
Model Name/Number | YD-500KR2DJE |
Phase | Three Phase |
Automation Grade | Manual |
Cooling Mode | Forced Air Cooling |
Voltage | 415V,+10% (Input Voltage) |
Frequency | 50-60 Hz |
Dimensions | 736 x 675 x762 mm |
Weight | 158 Kg |
Rated Output Voltage | 16-45 V |
Model | YD500 KR2 |
Cable Length | 3 m |
Product Details:
Welding Type | TIG Welding |
Model Name/Number | YD-400AT3DJT |
Phase | Three Phase |
Brand | Panasonic |
Voltage | 415 V, +/- 20% (Input Voltage) |
Frequency | 50-60 Hz |
Power Factor | Greater than 0.9 |
Cooling | Forced Air |
Open Circuit Voltage | 71 V (Output Voltage) |
Size/Dimension | 550x330x600 mm |
Operating Temperature | -10 to 50 Degree C |
Ingress Protection | IP23 (Class) |
Hot Start Current | 0-150 A (MMA) |
Welding Current Range | 20-410 A (Output Current) |
Product Details:
Brand | Panasonic |
Weight | 193 Kg |
Duty Cycle | 35% |
Voltage | 415V, +10%, -10% (Input Voltage) |
Frequency | 50-60 Hz |
Phase | Three |
Insulation Class | H |
Rated voltage range | 10.2-22.6V |
Rated duty cycle | 35% |
Ingress Protection | IP21S |
Product Details:
Output Current | 1200 |
Power Source | Electric |
Voltage | 220 V |
Phase | Three Phase |
Frequency | 50-60 Hz |
Material | MS |
Product Details:
Model Number/Name | YD630AT |
Weight | 70kg |
Frequency | 50-60Hz |
Brand | Panasonic |
Phase | Three Phase |
Rated input voltage | 415V, -20%, +20% |
Rated output current | 50-630A |
Insulation | H (Class) |
Product Details:
Model Name/Number | YC-400TX3 |
Welding Type | TIG Welding |
Voltage | 22.6 V (Output Voltage) |
Output Current Range | 315 A |
Brand | Panasonic |
Frequency | 50/60 Hz |
Weight | 43 Kg |
Duty Cycle | 60% |
Dimension | 327x555x602 mm |
Control Mode | IGBT Inverter Type |
Rated Input Capacity | 8.8 kVA/8.3kW |
Enclosure Protection Class | IP 23 |
Cooling Mode | Forced Air Cooling |
Product Details:
Current | 20-400 A |
Model Number/Name | YD400ET3 |
Phase | Three Phase |
Cooling Mode | Forced Air Cooling |
Brand | Panasonic |
Frequency | 50-60 Hz |
Weight | 36 Kg |
Power Factor | Greater than 0.9 |
Dimesions | 327 x 560 x 602 mm |
Operating temperature | -10 to 50 deg C |
Ingress Protection | IP 23 |
Product Details:
Brand | Panasonic |
Model | Panasonic YC-350/500WX5 |
4.3/5
Reviewed by 18 Users
Most Relevant Reviews